Raymond mill, also known as raymond grinding mill, raymond roller mill and raymond grinder, is suitable for grinding non-flammable and non-explosive materials.The finished powder size can be adjusted between 30 and 425 mesh(0.613mm-0.044mm).
Raymond mill is suitable for process in various non-flammable mineral which is below seven Mos hardness, moisture below 6%, such as limestone, calcite carbonate, dolomite, barite, talc, gypsum, quartz, bentonite, bauxite, iron ore, etc.
Applicable materials: Stone crusher is used for crushing over 120 kinds of rocks, such as limestone, granite, quartz, basalt, river stone, gold ore, iron ore, coal, gravel, aggregate etc. Different final output size could meet your different needs.
Milling roller devices adopt superimposed multistage seal with excellent seal performance. Good product size , through screening rate is 99%.
Electrical system adopts centralized control, and the grinding workshop can realize unmanned operation with easy maintenance.
Finished products, after being ground in the Raymond mill and separated by the classifier. Dust removing system is equipped to avoid pollution. Convenient impeller adjusting devices to improve the precision of the finished fine powder.
Finished products, after being ground in the Raymond mill and separated by the classifier. Dust removing system is equipped to avoid pollution. Convenient impeller adjusting devices to improve the precision of the finished fine powder.
The complete Raymond Mill machine is mainly including grinding roller, separator, blower, dust collector etc. According to user needs, it can be equipped with jaw / hammer crusher, bucket elevator, vibrating feeder, electric control cabinet etc. How raymond mill works? Large bulk materials crushed by jaw crusher to the needed size are fed into the storage hopper and then fed into a grinding chamber uniformly by vibrating feeder for grinding. Grinded materials are blown into separator by blower for classification. With the function of impellers in the separator, materials without meeting fineness are fallen into grinding chamber for grinding again. Materials meeting fineness are blown into a cyclone powder collector with airflow through pipelines for separation and collection. The powder from a discharging device is the finished product. Separated airflow is back to blower through return duct on the top of the cyclone powder collector.
*The output will vary according to different materials, feed particle size and other factors
| Model | Roller | Roll Dia. (mm) | Roll Ring Size (mm) | Max. Input Size (mm) | Output Size (mm) | Capacity T/Shaft | Power (Kw) | Dimension | |
| 3R | 1510 | 3 | 150*100 | 570*100 | 15 | 0.125-0.044 | 0.8-10 | 7.5 | 3200*1200*3800 |
| 2115 | 3 | 210*150 | 630*150 | 15 | 0.125-0.044 | 1-12 | 15 | 3500*3300*4500 | |
| 2615 | 3 | 260*150 | 780*150 | 20 | 0.125-0.044 | 1.5-20 | 18.5 | 4650*3600*5100 | |
| 2715 | 3 | 270*150 | 830*150 | 20 | 0.125-0.044 | 2-28 | 22 | 4700*3600*5100 | |
| 3015 | 3 | 300*150 | 875*150 | 25 | 0.125-0.044 | 2-35 | 30 | 5300*4100*5200 | |
| 4R | 3016 | 4 | 300*160 | 890*160 | 25 | 0.125-0.044 | 3-36 | 30 | 5400*4100*5200 |
| 3216 | 4 | 320*160 | 970*160 | 25 | 0.125*0.044 | 4-45 | 37 | 7100*5900*7900 | |
| 3220 | 4 | 320*200 | 970*200 | 25 | 0.125-0.044 | 4-55 | 45 | 9900*5800*1058 | |
| 5R | 4119 | 5 | 410*190 | 1270*190 | 30 | 0.613-0.044 | 8-60 | 75 | 9200*7250*9700 |
If you need further information,please fill in your questions and comments in the form below.
Representatives from Baichy machinery will be back to you within the hour,thanking you for your support to Baichy machinery
